Ciq-Arrete® Anti-Smoking Alarm Systems Layout Diagrams

1. Standard Hardwired System

The system may be installed as shown for battery operation. A plug in power supply may be used (Part CSA-PSU) if preferred to batteries. The remote sounder may be installed either internally or external to the system.

2. Master Slave System (Battery Operation)

The system may be installed as shown for battery operation. A plug in power supply may be used (Part CSA-PSU) if preferred to batteries. In the event of an alarm from any detector, a voice message is played within the protected area, and the sounder beacon unit alerts staff externally to a problem.

3. Master Slave System (Mains Supply Operation)

The system may be installed as shown below. In the event of an alarm from any detector, a voice message is played within the protected area, and the sounder beacon unit alerts staff externally to a problem. A 240V fused spur is required to connect the power supply

4. Master Slave System (Mains Supply Operation with Standard Controller)

The system may be installed as shown below. In the event of an alarm from any detector, a voice message is played within the protected area, and the controller will signal an alarm in a remote location. In addition the sounder beacon unit alerts staff in the vicinity to a problem. A 240V fused spur is required to connect the power supply.